|
item
|
picture
|
details / price
|
|
SUPER 'J'
AMA Electric A/B Competition
and
Sport Model
54-1/2 in wingspan
|
|
CB Model Designs is expanding it's line of kits into the AMA Electic A/B arena.
The SUPER 'J' is a scaled-up version of the JOULEBOX E-36 design. It was developed based on numerous
JOULEBOX E-36 customer suggestions and request for a larger JOULEBOX to fly in the AMA Electric
A/B events.
.
Maintaining the same arrangement and construction concept as the E-36 JOULEBOX,
this design is simple and familiar to JOULEBOX E-36 builders and offers an easy transition
to this larger size competition class.
See the product page for details, either by clicking on the picture or the link to the left
|
|
|
RAMROD 280
eNostalgia Competition
and
Sport Model
41-3/4 in wingspan
|
|
CB Model Designs is excited to be a part of the eNostalgia movement.
This model, our rendition of the infamous 1/2 A Ramrod 250, is easy to build and fly, much like the original gas powered model.
The RAMROD 280 was developed from a drawing Ramrod designer Ron St. Jean made for the John Pond plan Service, identified as the “Ramrod 250”.
The date of this drawing is unknown, but the Ramrod came into play as a free flight contender in the mid-1950’s and on,
in various sizes as developed by competition flyers utilizing the Ramrod configuration.
The Pond plan shows a Cox Thermal Hopper .049 engine installed, and was targeted for 1/2A class competitions.
The eNos version has followed the design intent of this drawing and based on the wing area, puts it in the Class ‘A’ competition
bracket based on the NFFS rulebook sizing parameters for electric powered Nostalgia era designs.
The name therefore has been updated to “RAMROD 280” to avoid confusion over wing sizing rules which limit 1/2A eNostalgia models to 250 square inches or less.
See the product page for details, either by clicking on the picture or the link to the left
|
|
|
JOULEBOX
MK III
E-36 Competition
and
Sport Model
36 in wingspan
|
|
The JOULEBOX 190 MK II has been updated to the JOULEBOX MK III
In addition to the MK II upgrades of a redesigned fuselage with lower
pylon, smaller fin and cleaner front end with an enclosed battery compartment,
the MK III version has been refined for additional weight reduction and installation
provisions for the Cobra 2203/28 brushless E36/F1S motor.
The JOULEBOX MK III is offered as a Short Kit, a Standard Kit and two Deluxe Kit options.
Deluxe Kit Option A comes with Starlink-Flitetech's electronic timer.
Deluxe Kit Option B comes with Texas Timers eMax electronic timer.
Both timers come with the optional RDT pigtail for use with your RDT system.
Both Deluxe Kit options come with all the other necessary drivetrain components
(with the exception of the LiPo battery which the builder must supply).
This includes a Cobra 2203/28 brushless motor, a set of 7.5 X 4 Graupner folding prop blades
with a Texas Timers prop hub,
a 12 Amp ESC, a micro servo for DT operation,
an electrical connector set with 2MM bullet pin connectors for the ESC to motor connections
and a Deans Micro single pin connector set for ESC to LiPo connection.
See the product page for details, either by clicking on the picture or the link to the left
|
|
|
APACHE II
MK II
E-36 Competition
and
Sport Model
36 in wingspan
|
|
APACHE II MK II
E-36 Competition and Sport Model
The APACHE II has evolved into the APACHE II MK II.
The main design change is the MK II has a slightly longer nose moment to allow for a 7 x 6 folding prop.
The APACHE II MK II is the next generation of the APACHE design that has evolved from Ralph Ray’s
1960 Nationals winning 1/2A gas model which was kitted by Veco for many years.
Intended for experienced free flight modelers, it is offered in short kit form to allow you to install the system of your choice for the drive train and electronics.
|
APACHE II MK II
Short Kit
includes
tail boom and plans
|
APACHE II MK II
laser cut parts only
does not include
tail boom and plans
|
|
|
|
Hyperion
Z1709-06 motor
sold out
no longer available
from the manufacturer
info maintained here
for reference only
|
 |
The Hyperion Z1709-06 is a superior quality brushless motor that is no longer in production. These motors are thought of as the best available for E-36 models. CB Model Designs has acquired the remaining stock of these fine motors and is making them available to our customers. Combined with an APC 6 x 6E prop, these motors will produce outstanding climb performance.
Order yours today for your APACHE II or other E-36 model.
|
|
Hyperion Z1709-06 brushless motor
|
|
|
|
SUPER Y
P-30 Competition
and
Sport Model
30 in wingspan
|
|
|
SUPER Y Full Kit
|
SUPER Y Short Kit
|
The SUPER Y has superceded the slighly larger YARDSTICK. Now sized to be a competative P-30 it still has the lines of an Old Time Stick model and is competative in the Small Mulvihill event. Get yours today!
|
|
|
BOOMER
MK III
P-30 Competition
and
Sport Model
30 in wingspan
|
|
|
BOOMER MK III Full Kit
|
BOOMER MK III Short Kit
|
Short Kit includes: laser parts (includes fuselage & pylon parts), CAD drawing
and printed Construction Manual. You provide your own balsa strip wood, tissue
covering , hardware, timer and prop
|
|
|
MONARCH
P-30 Competition
and
Sport Model
30 in wingspan
|
|
|
The MONARCH is no longer available
We maintain the
MONARCH product page
on our website for
those who have purchased one in the past and for reference purposes.
|
|
|
|
|
YARDSTICK
Rubber Power Sport
26 in wingspan
|
|
|
The YARDSTICK has been superseded by the SUPER Y
and is therefore not available as a full kit
We maintain the
YARDSTICK product page
on our website for those who have purchased one in the past and for reference purposes.
While we no longer offer a full kit for the YARDSTICK, we do offer a short kit.
Email us for this option:
cbmodeldesigns@gmail.com
|
|
|
|
Curtiss XP-40Q
Rubber Power Sport
26 in wingspan
|
|
|
